ESP32-WROVER-IE
Same platform as ESP32-WROVER-E but with an external antenna connector instead of the on-board PCB antenna.
ESP32-WROVER-IE is Espressif’s module for the classic ESP32 SoC with integrated SPI flash and PSRAM with the RF interface through an external antenna connector (same platform as the WROVER-E). In MCUID’s hardware chain — chip → module → board — this page holds the module facts; chip capabilities live on the ESP32 chip page, headers and revisions on the DevKitC board page.
Start from the board: ESP32-DevKitC — see the first-flash guide for the bring-up path.
What the module decides
- GPIO 16/17 are occupied by PSRAM wiring on this module family — same condition as the WROVER-E.
- Antenna and storage — the configuration above is this module’s fact; the chip page stays at silicon capabilities.
- Compatible boards — the list below is generated from the same data as the board pages.
Variants
| Variant | Summary | Source |
|---|---|---|
| No storage variants recorded for this module yet. | ||
Published fields
| Field | Value | Applies to | Status | Source | Notes |
|---|---|---|---|---|---|
gpio.occupied_by_internal_storage | 16, 17 | Condition: module family integrates PSRAM (all ordering variants with R8/R2 PSRAM suffix) | verified · cc40 · 2026-11-08 | DevKitC V4 guide | Same official restriction scope as ESP32-WROVER-E, quoted jointly in the DevKitC guide footnote. |